Match the items given in Column I with o | Class 7 Science Chapter Light, Light NCERT Solutions

Welcome to the NCERT Solutions for Class 7 Science - Chapter Light. This page offers a step-by-step solution to the specific question from Exercise 1, Question 3: . With detailed answers and explanations for each chapter, students can strengthen their understanding and prepare confidently for exams. Ideal for CBSE and other board students, this resource will simplify your study experience.

Question 3:

Match the items given in Column I with one or more items of Column II.

Column I Column II
(a) A plane mirror (i) Used as a magnifying glass.
(b) A convex mirror (ii) Can form image of objects spread over a large area.
(c) A convex lens (iii) Used by dentists to see enlarged image of teeth.
(d) A concave mirror (iv) The image is always inverted and magnified. (e) A concave lens (v) The image is erect and of the same size as the object.
(vi) The image is erect and smaller in size than the object.

Answer:

Column I Column II

(a) A plane mirror (v) The image is erect and of the same size as the object.
(b) A convex mirror (ii) Can form image of objects spreads over a large area.
(c) A convex lens (i) Used as a magnifying glass.
(d) A concave mirror (iii) Used by dentists to see enlarged image of teeth.
(e) A concave lens (vi) The image is erect and smaller in size than the object.

1. A plane mirror: A plane mirror have a flat reflective surface. The angle of reflection is always equals to the angle of incidence for the light rays which strikes the plane mirror. The angle formed by the incident ray and surface of normal is called the angle of incidence.

2. A convex mirror: A convex mirror is a diverging mirror in which the reflective surface bulges towards the light Source. The image formed by convex mirrors are smaller than the object but gets larger as they approach.

3. Concave mirror: A concave mirror has a reflective surface that is curved inwards and away from the light source. Concave mirrors are widely used in headlights of auto mobiles motor vehicles, torch lights etc.

4. Convex lens: The convex lens is a lens that converges rays of light that convey parallel to its principal axis which is relatively thick cross the middle and thin at the lower and upper edges. A convex lense in thinner in the middle and thicker towards the edges.

5. Concave lens: A concave lens is a lens that possesses at least one surface that curves inwards. It is a diverging lens, meaning that it spreads out light rays that have been refracted through it. A concave lens is thinner at its edges, and is used to correct short sightedness.

Other Questions of Chapter Light

What is a virtual image? Give one situation where a virtual image is formed.

David is observing his image in a plane mirror. The distance between the mirror and his image is 4 m. If he moves 1 m towards the mirror, then the distance between David and his image will be

(i) 3 m (ii) 5 m
(iii) 6 m (iv) 8 m

Which type of mirror can form a real image?

Mark 'T' if the statement is true and 'F' if it is false:

(a) We can obtain an enlarged and erect image by a convex mirror. (T/F)
(b) A concave lens always form a virtual image. (T/F)
(c) We can obtain a real, enlarged and inverted image by a concave mirror. (T/F)
(d) A real image cannot be obtained on a screen. (T/F)
(e) A concave mirror always form a real image. (T/F)

The rear view mirror of a car is a plane mirror. A driver is reversing his car at a speed of 2 m/s. The driver sees in his rear view mirror the
image of a truck parked behind his car. The speed at which the image of the truck appears to approach the driver will be

(i) 1 m/s (ii) 2 m/s
(iii) 4 m/s (iv) 8 m/s

11. A virtual image larger than the object can be produced by a

(i) concave lens (ii) concave mirror
(iii) convex mirror (iv) plane mirror

Fill in the blanks:

(a) An image that cannot be obtained on a screen is called ____________.
(b) Image formed by a convex __________ is always virtual and smaller in size.
(c) An image formed by a __________ mirror is always of the same size as that of the object.
(d) An image which can be obtained on a screen is called a _________ image.
(e) An image formed by a concave ___________ cannot be obtained on a screen.

State the characteristics of the image formed by a plane mirror.

Which type of lens forms always a virtual image?

Find out the letters of English alphabet or any other language known to you in which the image formed in a plane mirror appears exactly like the letter itself. Discuss your findings.

Popular questions of class 7 Science

Classify the changes involved in the following processes as physical or chemical changes:
(a) Photosynthesis
(b) Dissolving sugar in water
(c) Burning of coal
(d) Melting of wax
(e) Beating aluminium to make aluminium foil
(f ) Digestion of food

Here is a crossword puzzle: Good luck!

Across
3. Liquid waste products
4. Solid waste extracted in sewage treatment
6. A word related to hygiene
8. Waste matter discharged from human body

Down
1. Used water
2. A pipe carrying sewage
5. Micro-organisms which causes cholera
7. A chemical to disinfect water

Given below is a crossword puzzle based on this lesson. Use hints to fill in the blank spaces with letters that complete the words.
Down Across
(D) 1 : Thorough washing (A) 1 : Keeps warm
2 : Animal fibre 2 : Its leaves are eaten by silkworms
3 : Long thread like structure 3 : Hatches from egg of moth

Sketch the cross section of soil and label the various layers.

Solve the following crossword puzzle with the clues given:

Across
2. Plantation prevents it.
5. Use should be banned to avoid soil pollution.
6. Type of soil used for making pottery.
7. Living organism in the soil.

Down
1. In desert soil erosion occurs through.
3. Clay and loam are suitable for cereals like.
4. This type of soil can hold very little water.
5. Collective name for layers of soil.

Take three test-tubes. Fill æth of each with water. Label them A, B and C. Keep a snail in test-tube A, a water plant in test-tube B and in C, keep snail and plant both. Which test-tube would have the highest concentration of CO₂?

Sketch the reproductive parts of a flower.

Describe how crystals of copper sulphate are prepared.

Why does an athlete breathe faster and deeper than usual after finishing the race?

Write one similarity and one difference between the nutrition in amoeba and human beings.

Recently Viewed Questions of Class 7 Science

What are the components of blood?

Name the source from which litmus solution is obtained. What is the use of this solution?

Classify the following as motion along a straight line, circular or oscillatory motion:

(i) Motion of your hands while running.
(ii) Motion of a horse pulling a cart on a straight road.
(iii) Motion of a child in a merry-go-round.
(iv) Motion of a child on a see-saw.
(v) Motion of the hammer of an electric bell.
(vi) Motion of a train on a straight bridge.

Match the items given in Column I with those in Column II:
Column I Column II
Chlorophyll Bacteria
Nitrogen Heterotrophs
Amarbel Pitcher plant
Animals Leaf
Insects Parasite

How do elephant living in the tropical rainforest adapt itself?

Out of the following, which are the two terms related to silk production? Sericulture, floriculture, moriculture, apiculture and silviculture.

Hints:
(i) Silk production involves cultivation of mulberry leaves and rearing silkworms.
(ii) Scientific name of mulberry is Morus alba.

A simple pendulum takes 32 s to complete 20 oscillations. What is the time period of the pendulum?

Describe how crystals of copper sulphate are prepared.

The gas we use in the kitchen is called liquified petroleum gas (LPG). In the cylinder it exist as a liquid. When it comes out from the cylinder it
becomes a gas (Change – A) then it burns (Change – B). The following statements pertain to these changes. Choose the correct one.

(i) Process – A is a chemical change.
(ii) Process – B is a chemical change.
(iii) Both processes A and B are chemical changes.
(iv) None of these processes is a chemical change.

Can we survive only on raw, leafy vegetables/grass? Discuss.

Study Tips for Answering NCERT Questions:

NCERT questions are designed to test your understanding of the concepts and theories discussed in the chapter. Here are some tips to help you answer NCERT questions effectively:

Read the question carefully and focus on the core concept being asked.
Reference examples and data from the chapter when answering questions about Light.
Review previous year question papers to get an idea of how such questions may be framed in exams.
Practice answering questions within the time limit to improve your speed and accuracy.
Discuss your answers with your teachers or peers to get feedback and improve your understanding.

Latest Blog Posts

Stay updated with our latest educational content and study tips

Understanding Procrastination and Why Students Delay Studying | How To Fix It

One of the challenging things students face nowadays is procrastination. It hinders productivity, making it difficult for students to score well. We often associate procrastination as just being lazy. But there’s more to it. Various studies have shown that procrastination stems from negative feelings such as stress and anxiety. Oftentimes, when we start, we think […]

Effective Tips to Avoid Nervous Breakdown during CBSE Board Exam

The CBSE Board Exam is a crucial milestone for millions of students across India. The Central Board of Secondary Education is famous for its imparting quality education and knowledge which reaches out to a large share of students. Also, it is important to know that, the CBSE board takes a slight unconventional route, since it […]

HSSC CET Haryana 2025: Admit Card, Exam Dates, Fees, and More

Haryana government issued a notification on 31st December 2024 through its Gazette notification No. 42/119/2019-5HR-II for CET Haryana 2024. The Common Eligibility Test (CET) for Haryana is a significant opportunity for candidates seeking government jobs in Group C and Group D posts. Below is a comprehensive summary of the key information you need to know […]

Why Sleep is Crucial for Memory Retention and Learning?

Sacrificing your sleep to study more is doing more damage than you think. While it may seem like utilizing every hour of the day for study leads to better outcomes, the reality is quite the opposite. Lack of proper rest can negatively impact your brain, especially when it comes to sleep and memory retention. You’ll […]

View All Blog Posts