Class 11 Chemistry - Chapter Redox Reactions NCERT Solutions | Predict the products of electrolysis in
Predict the products of electrolysis in each of the following:
(i) An aqueous solution of AgNO3 with silver electrodes
(ii) An aqueous solution AgNO3 with platinum electrodes
(iii) A dilute solution of H2SO4 with platinum electrodes
(iv) An aqueous solution of CuCl2 with platinum electrodes.
(i) AgNO3 ionizes in aqueous solutions to form Ag+ and NO-3 ions.
On electrolysis, either Ag+ ions or H2O molecules can be reduced at the cathode. But the reduction potential of Ag+ ions is higher than that of H2O.
Ag+(aq) + e- → Ag(s) ; E° = +0.80V
2H2O(l) + 2e- → H2(g) + 2OH-(aq) ; E° = -0.83V
Hence, Ag+ ions are reduced at the cathode. Similarly, Ag metal or H2O molecules can be oxidized at the anode. But the oxidation potential of Ag is higher than that of H2O molecules.
Ag(s) → Ag+(aq) + e- ; E° = -0.80V
2H2O(l) → O2(g) + 4 H+(aq) + 4e- ; E° = -1.23V
Therefore, Ag metal gets oxidized at the anode.
(ii) Pt cannot be oxidized easily. Hence, at the anode, oxidation of water occurs to liberate O2. At the cathode, Ag+ ions are reduced and get deposited.
(iii) H2SO4 ionizes in aqueous solutions to give H+ and SO2-4 ions.
H2SO4(aq) → 2H+(aq) + SO2-4(aq)
On electrolysis, either of H+ ions or H2O molecules can get reduced at the cathode. But the reduction potential of H+ ions is higher than that of H2O molecules.
2H+(aq) + 2e- → H2(g) ; E° = 0.0V
2H2O(aq) + 2e- → H2g + 2OH-(aq) ; E° = -0.83V
Hence, at the cathode, H+ ions are reduced to liberate H2 gas.
On the other hand, at the anode, either of SO2-4 ions or H2O molecules can get oxidized. But the oxidation of SO2-4 involves breaking of more bonds than that of H2O molecules.Hence, ions have a lower oxidation potential than H2O. Thus, H2O is oxidized at the anode to liberate O2 molecules.
(iv) In aqueous solutions, CuCl2 ionizes to give Cu2+ and Cl- ions as:
CuCl2(aq) → Cu2+(aq) + 2Cl-(aq)
On electrolysis, either of Cu2+ ions or H2O molecules can get reduced at the cathode. But the reduction potential of Cu2+ is more than that of H2O molecules.
Cu2+(aq) + 2e- → Cu(aq) ; E° = +0.34V
H2O(l) + 2e- → H2(g) + 2OH- ; E° = -0.83V
Hence, Cu2+ ions are reduced at the cathode and get deposited.
Similarly, at the anode, either of Cl- or H2O is oxidized. The oxidation potential of H2O is higher than that of Cl-.
2Cl-(aq) → Cl2(g) + 2e- ; E° = -1.36V
2H2O(l) → O2(g) + 4H+(aq) + 4e- ; E° = -1.23V
But oxidation of H2O molecules occurs at a lower electrode potential than that of Cl- ions because of over-voltage (extra voltage required to liberate gas). As a result, Cl- ions are oxidized at the anode to liberate Cl2 gas.
More Questions From Class 11 Chemistry - Chapter Redox Reactions
- Q:-
Balance the following redox reactions by ion – electron method :
(a) MnO4 – (aq) + I – (aq) → MnO2 (s) + I2(s) (in basic medium)
(b) MnO4 – (aq) + SO2 (g) → Mn2+ (aq) + HSO4– (aq) (in acidic solution)
(c) H2O2 (aq) + Fe 2+ (aq) → Fe3+ (aq) + H2O (l) (in acidic solution)
(d) Cr2O7 2– + SO2(g) → Cr3+ (aq) + SO42– (aq) (in acidic solution)
- Q:-
Assign oxidation number to the underlined elements in each of the following species:
(a) NaH2PO4
(b) NaHSO4
(c) H4P2O7
(d) K2MnO4
(e) CaO2
(f) NaBH4
(g) H2S2O7
(h) KAl(SO4)2.12 H2O
- Q:-
What are the oxidation number of the underlined elements in each of the following and how do you rationalise your results ?
(a) KI3
(b) H2S4O6
(c) Fe3O4
(d) CH3CH2OH
(e) CH3COOH
- Q:-
Justify that the following reactions are redox reactions:
(a) CuO(s) + H2(g) → Cu(s) + H2O(g)
(b) Fe2O3(s) + 3CO(g) → 2Fe(s) + 3CO2(g)
(c) 4BCl3(g) + 3LiAlH4(s) → 2B2H6(g) + 3LiCl(s) + 3 AlCl3 (s)
(d) 2K(s) + F2(g) → 2K+F– (s)
(e) 4 NH3(g) + 5 O2(g) → 4NO(g) + 6H2O(g)
- Q:-
Balance the following equations in basic medium by ion-electron method and oxidation number methods and identify the oxidising agent and the reducing agent.
(a) P4(s) + OH – (aq) → PH3(g) + HPO2 – (aq)
(b) N2H4(l) + ClO3 – (aq) → NO(g) + Cl–(g)
(c) Cl2O7 (g) + H2O2(aq) → ClO – 2(aq) + O2(g) + H + (aq)
- Q:-
Fluorine reacts with ice and results in the change:
H2O(s) + F2(g) → HF(g) + HOF(g)
Justify that this reaction is a redox reaction.
- Q:-
Write the formulae for the following compounds:
(a) Mercury(II) chloride
(b) Nickel(II) sulphate
(c) Tin(IV) oxide
(d) Thallium(I) sulphate
(e) Iron(III) sulphate
(f) Chromium(III) oxide - Q:-
While sulphur dioxide and hydrogen peroxide can act as oxidising as well as reducing agents in their reactions, ozone and nitric acid act only as oxidants. Why?
- Q:-
Identify the substance oxidised, reduced, oxidising agent and reducing agent for each of the following reactions:
(a) 2AgBr (s) + C6H6O2(aq) → 2Ag(s) + 2HBr (aq) + C6H4O2(aq)
(b) HCHO(l) + 2[Ag (NH3)2]+(aq) + 3OH-(aq) → 2Ag(s) + HCOO-(aq) + 4NH3(aq) + 2H2O(l)
(c) HCHO (l) + 2Cu2+(aq) + 5 OH-(aq) → Cu2O(s) + HCOO-(aq) + 3H2O(l)
(d) N2H4(l) + 2H2O2(l) → N2(g) + 4H2O(l)
(e) Pb(s) + PbO2(s) + 2H2SO4(aq) → 2PbSO4(s) + 2H2O(l)
- Q:-
The compound AgF2 is an unstable compound. However, if formed, the compound acts as a very strong oxidizing agent. Why?
Popular Questions of Class 11 Chemistry
- Q:-
How do you account for the formation of ethane during chlorination of methane?
- Q:-
What are hybridisation states of each carbon atom in the following compounds ?
(i) CH2=C=O,
(ii) CH3CH=CH2,
(iii) (CH3)2CO,
(iv) CH2=CHCN,
(v) C6H6
- Q:-
What will be the minimum pressure required to compress 500 dm3 of air at 1 bar to 200 dm3 at 30°C?
- Q:-
What are the common physical and chemical features of alkali metals?
- Q:-
Calculate the molecular mass of the following:
(i) H2O
(ii) CO2
(iii) CH4 - Q:-
What is the basic theme of organisation in the periodic table?
- Q:-
Explain the formation of a chemical bond.
- Q:-
Choose the correct answer. A thermodynamic state function is a quantity
(i) used to determine heat changes
(ii) whose value is independent of path
(iii) used to determine pressure volume work
(iv) whose value depends on temperature only. - Q:-
A liquid is in equilibrium with its vapour in a sealed container at a fixed temperature. The volume of the container is suddenly increased.
a) What is the initial effect of the change on vapour pressure?
b) How do rates of evaporation and condensation change initially?
c) What happens when equilibrium is restored finally and what will be the final vapour pressure? - Q:-
Justify the position of hydrogen in the periodic table on the basis of its electronic configuration.
Recently Viewed Questions of Class 11 Chemistry
- Q:-
What is the wavelength of light emitted when the electron in a hydrogen atom undergoes transition from an energy level with n = 4 to an energy level with n = 2?
- Q:-
Calculate the mass percent of different elements present in sodium sulphate (Na2SO4).
- Q:-
Describe the method, which can be used to separate two compounds with different solubilities in a solvent S.
- Q:-
The first (ΔiH1) and the second (ΔiH) ionization enthalpies (in kJ mol–1) and the (ΔegH) electron gain enthalpy (in kJ mol–1) of a few elements are given below:
Elements ΔiH1 ΔiH ΔegH I 520 7300 -60 II 419 3051 -48 III 1681 3374 -328 IV 1008 1846 -295 V 2372 5251 +48 VI 738 1451 -40 Which of the above elements is likely to be :
(a) the least reactive element.
(b) the most reactive metal.
(c) the most reactive non-metal.
(d) the least reactive non-metal.
(e) the metal which can form a stable binary halide of the formula MX2, (X=halogen).
(f) the metal which can form a predominantly stable covalent halide of the formula MX (X=halogen)?
- Q:-
At 700 K, equilibrium constant for the reaction:
H2 (g) + I2 (g) ↔ 2HI (g)
is 54.8. If 0.5 mol L–1 of HI(g) is present at equilibrium at 700 K, what are the concentration of H2(g) and I2(g) assuming that we initially started with HI(g) and allowed it to reach equilibrium at 700K?
- Q:-
The enthalpies of all elements in their standard states are:
(i) unity
(ii) zero
(iii) < 0
(iv) different for each element
- Q:-
Equilibrium constant, Kc for the reaction
N2 (g) + 3H2 (g) ↔ 2NH3 (g) at 500 K is 0.061
At a particular time, the analysis shows that composition of the reaction mixture is 3.0 mol L–1 N2, 2.0 mol L–1 H2 and 0.5 mol L–1 NH3.
Is the reaction at equilibrium?
If not in which direction does the reaction tend to proceed to reach equilibrium?
- Q:-
Explain the significance of sodium, potassium, magnesium and calcium inbiological fluids.
- Q:-
For your agricultural field or garden you have developed a compost producing pit. Discuss the process in the light of bad odour, flies and recycling of wastes for a good produce.
- Q:-
The diameter of zinc atom is 2.6 Å .
Calculate
(a) radius of zinc atom in pm and
(b) number of atoms present in a length of 1.6 cm if the zinc atoms are arranged side by side lengthwise.
- All Chapters Of Class 11 Chemistry
- All Subjects Of Class 11