Balance the following redox reactions by ion – electron method :
(a) MnO4 – (aq) + I – (aq) → MnO2 (s) + I2(s) (in basic medium)
(b) MnO4 – (aq) + SO2 (g) → Mn2+ (aq) + HSO4– (aq) (in acidic solution)
(c) H2O2 (aq) + Fe 2+ (aq) → Fe3+ (aq) + H2O (l) (in acidic solution)
(d) Cr2O7 2– + SO2(g) → Cr3+ (aq) + SO42– (aq) (in acidic solution)
Step 1:
The two half reactions involved in the given reaction are:
-1 0
Oxidation half reaction: l (aq) → l2(s)
+7 +4
Reduction half reaction: Mn O-4(aq) → MnO2(aq)
Step 2:
Balancing I in the oxidation half reaction, we have:
2l-(aq) → l2(s)
Now, to balance the charge, we add 2 e- to the RHS of the reaction.
2l-(aq) → l2(s) + 2e-
Step 3 :
In the reduction half reaction, the oxidation state of Mn has reduced from +7 to +4. Thus, 3 electrons are added to the LHS of the reaction.
MnO-4(aq) + 3e- →MnO2(aq)
Now, to balance the charge, we add 4 OH- ions to the RHS of the reaction as the reaction is taking place in a basic medium.
MnO-4(aq) + 3e- →MnO2(aq) + 4OH-
Step 4:
In this equation, there are 6 O atoms on the RHS and 4 O atoms on the LHS. Therefore, two water molecules are added to the LHS.
MnO-4(aq) + 2H2O + 3e- →MnO2(aq) + 4OH-
Step 5:
Equalising the number of electrons by multiplying the oxidation half reaction by 3 and the reduction half reaction by 2, we have:
6l-(aq) → 3l2(s) + 2e-
2MnO-4(aq) + 4H2O + 6e- → 2MnO2(s) + 8OH-(aq)
Step 6:
Adding the two half reactions, we have the net balanced redox reaction as:
6l-(aq) + 2MnO-4(aq) + 4H2O(l) → 3l2(s) + 2MnO2(s) + 8OH-(aq)
(b) Following the steps as in part (a), we have the oxidation half reaction as:
SO2(g) + 2H2O(l) → HSO-4(aq) + 3H+(aq) + 2e-(aq)
And the reduction half reaction as:
MnO-4(aq) + 8H+(aq) + 5e- → Mn2+(aq) + 4H2O(l)
Multiplying the oxidation half reaction by 5 and the reduction half reaction by 2, and then by adding them, we have the net balanced redox reaction as:
2MnO-4(aq) + 5SO2(g) + 2H2O(l) + H+(aq) → Mn2+(aq) + HSO-4(aq)
(c) Following the steps as in part (a), we have the oxidation half reaction as:
Fe2+(aq) → Fe3+(aq) + e-
And the reduction half reaction as:
H2O2(aq) + 2H+(aq) + 2e- → 2H2O(l)
Multiplying the oxidation half reaction by 2 and then adding it to the reduction half reaction, we have the net balanced redox reaction as:
H2O2(aq) + 2Fe2+(aq) + 2H+(aq) → 2Fe3+(aq) + 2H2O(l)
(d) Following the steps as in part (a), we have the oxidation half reaction as:
SO2(g) + 2H2O(l) → SO2-4(aq) + 4H+ (aq) + 2e-
And the reduction half reaction as:
Cr2O2-7(aq) + 14H+(aq) + 6e- → 2Cr3+(aq) + 3SO2-4(aq) + H2O(l)
Multiplying the oxidation half reaction by 3 and then adding it to the reduction half reaction, we have the net balanced redox reaction as:
Cr2O2-7(aq) + 3SO2(g) + 2H+(aq) → 2Cr3+(aq) + 3SO2-4(aq) + H2O(l)
Assign oxidation number to the underlined elements in each of the following species:
(a) NaH2PO4
(b) NaHSO4
(c) H4P2O7
(d) K2MnO4
(e) CaO2
(f) NaBH4
(g) H2S2O7
(h) KAl(SO4)2.12 H2O
What are the oxidation number of the underlined elements in each of the following and how do you rationalise your results ?
(a) KI3
(b) H2S4O6
(c) Fe3O4
(d) CH3CH2OH
(e) CH3COOH
Justify that the following reactions are redox reactions:
(a) CuO(s) + H2(g) → Cu(s) + H2O(g)
(b) Fe2O3(s) + 3CO(g) → 2Fe(s) + 3CO2(g)
(c) 4BCl3(g) + 3LiAlH4(s) → 2B2H6(g) + 3LiCl(s) + 3 AlCl3 (s)
(d) 2K(s) + F2(g) → 2K+F– (s)
(e) 4 NH3(g) + 5 O2(g) → 4NO(g) + 6H2O(g)
Balance the following equations in basic medium by ion-electron method and oxidation number methods and identify the oxidising agent and the reducing agent.
(a) P4(s) + OH – (aq) → PH3(g) + HPO2 – (aq)
(b) N2H4(l) + ClO3 – (aq) → NO(g) + Cl–(g)
(c) Cl2O7 (g) + H2O2(aq) → ClO – 2(aq) + O2(g) + H + (aq)
Fluorine reacts with ice and results in the change:
H2O(s) + F2(g) → HF(g) + HOF(g)
Justify that this reaction is a redox reaction.
Write the formulae for the following compounds:
(a) Mercury(II) chloride
(b) Nickel(II) sulphate
(c) Tin(IV) oxide
(d) Thallium(I) sulphate
(e) Iron(III) sulphate
(f) Chromium(III) oxide
While sulphur dioxide and hydrogen peroxide can act as oxidising as well as reducing agents in their reactions, ozone and nitric acid act only as oxidants. Why?
Identify the substance oxidised, reduced, oxidising agent and reducing agent for each of the following reactions:
(a) 2AgBr (s) + C6H6O2(aq) → 2Ag(s) + 2HBr (aq) + C6H4O2(aq)
(b) HCHO(l) + 2[Ag (NH3)2]+(aq) + 3OH-(aq) → 2Ag(s) + HCOO-(aq) + 4NH3(aq) + 2H2O(l)
(c) HCHO (l) + 2Cu2+(aq) + 5 OH-(aq) → Cu2O(s) + HCOO-(aq) + 3H2O(l)
(d) N2H4(l) + 2H2O2(l) → N2(g) + 4H2O(l)
(e) Pb(s) + PbO2(s) + 2H2SO4(aq) → 2PbSO4(s) + 2H2O(l)
The compound AgF2 is an unstable compound. However, if formed, the compound acts as a very strong oxidizing agent. Why?
Calculate the oxidation number of sulphur, chromium and nitrogen in H2SO5, Cr2O2- 7 and NO– 3. Suggest structure of these compounds. Count for the fallacy.
How do you account for the formation of ethane during chlorination of methane?
What are hybridisation states of each carbon atom in the following compounds ?
(i) CH2=C=O,
(ii) CH3CH=CH2,
(iii) (CH3)2CO,
(iv) CH2=CHCN,
(v) C6H6
What will be the minimum pressure required to compress 500 dm3 of air at 1 bar to 200 dm3 at 30°C?
What are the common physical and chemical features of alkali metals?
Calculate the molecular mass of the following:
(i) H2O
(ii) CO2
(iii) CH4
What is the basic theme of organisation in the periodic table?
Explain the formation of a chemical bond.
Choose the correct answer. A thermodynamic state function is a quantity
(i) used to determine heat changes
(ii) whose value is independent of path
(iii) used to determine pressure volume work
(iv) whose value depends on temperature only.
A liquid is in equilibrium with its vapour in a sealed container at a fixed temperature. The volume of the container is suddenly increased.
a) What is the initial effect of the change on vapour pressure?
b) How do rates of evaporation and condensation change initially?
c) What happens when equilibrium is restored finally and what will be the final vapour pressure?
Justify the position of hydrogen in the periodic table on the basis of its electronic configuration.
Following results are observed when sodium metal is irradiated with different wavelengths.
Calculate (a) threshold wavelength and, (b) Planck’s constant.
λ (nm) | 500 | 450 |
400 |
v × 10–5 (cm s–1) | 2.55 | 4.35 | 5.35 |
The best and latest technique for isolation, purification and separation of organic compounds is:
(a) Crystallisation
(b) Distillation
(c) Sublimation
(d) Chromatography
Which out of NH3 and NF3 has higher dipole moment and why?
What is meant by the term bond order? Calculate the bond order of: N2, O2,O2+,and O2-.
The work function for caesium atom is 1.9 eV. Calculate
(a) the threshold wavelength and
(b) the threshold frequency of the radiation. If the caesium element is irradiated with a wavelength 500 nm, calculate the kinetic energy and the velocity of the ejected photoelectron.
Describe the bulk preparation of dihydrogen by electrolytic method. What is the role of an electrolyte in this process?
2.9 g of a gas at 95 °C occupied the same volume as 0.184 g of dihydrogen at 17 °C, at the same pressure. What is the molar mass of the gas?
Ionic product of water at 310 K is 2.7 x 10-14. What is the pH of neutral water at this temperature?
Write the favourable factors for the formation of ionic bond.
Suggest reasons why the B-F bond lengths in BF3 (130 pm) and BF-4(143 pm) differ.