Why do we prefer a convex mirror as a rear-view mirror in vehicles?
Convex mirrors are preferred as rear view mirrors because they give a virtual, erect, and diminished image of the objects when placed in front of them and cover a wider field of view, which allows the driver to see the traffic behind him.
One-half of a convex lens is covered with a black paper. Will this lens produce a complete image of the object? Verify your answer experimentally. Explain your observations.
Find out, from Table 10.3, the medium having highest optical density. Also find the medium with lowest optical density.
Material medium |
Refractive index |
Material medium |
Refractive index |
Air | 1.0003 | Canada Balsam |
1.53 |
Ice | 1.31 | ||
Water | 1.33 | Rock salt | 1.54 |
Alcohol | 1.36 | ||
Kerosene | 1.44 | Carbon disulphide |
1.63 |
Fused quartz |
1.46 | ||
Turpentine oil |
1.47 | Ruby | 1.71 |
Benzene | 1.50 | Sapphire | 1.77 |
Crown glass |
1.52 | Diamond | 2.42 |
Table 10.3 Absolute refractive index of some material media
An object 5 cm in length is held 25 cm away from a converging lens of focal length 10 cm. Draw the ray diagram and find the position, size and the nature of the image formed.
An object 5.0 cm in length is placed at a distance of 20 cm in front of a convex mirror of radius of curvature 30 cm. Find the position of the image, its nature and size.
You are given kerosene, turpentine and water. In which of these does the light travel fastest? Use the information given in Table 10.3.
Material medium |
Refractive index |
Material medium |
Refractive index |
Air | 1.0003 | Canada Balsam |
1.53 |
Ice | 1.31 | ||
Water | 1.33 | Rock salt | 1.54 |
Alcohol | 1.36 | ||
Kerosene | 1.44 | Carbon disulphide |
1.63 |
Fused quartz |
1.46 | ||
Turpentine oil |
1.47 | Ruby | 1.71 |
Benzene | 1.50 | Sapphire | 1.77 |
Crown glass |
1.52 | Diamond | 2.42 |
A convex lens forms a real and inverted image of a needle at a distance of 50 cm from it. Where is the needle placed in front of the convex lens if the image is equal to the size of the object? Also, find the power of the lens.
Define 1 dioptre of power of a lens.
Find the focal length of a lens of power – 2.0 D. What type of lens is this?
Find the focal length of a convex mirror whose radius of curvature is 32 cm.
The magnification produced by a plane mirror is +1. What does this mean?
Did Döbereiner’s triads also exist in the columns of Newlands’ Octaves? Compare and find out.
What is a good source of energy?
Why is diffusion insufficient to meet the oxygen requirements of multi-cellular organisms like humans?
What are trophic levels? Give an example of a food chain and state the different trophic levels in it.
What changes can you make in your habits to become more environment-friendly?
What is the difference between a reflex action and walking?
What is the importance of DNA copying in reproduction?
If a trait A exists in 10% of a population of an asexually reproducing species and a trait B exists in 60% of the same population, which trait is likely to have arisen earlier?
Why should a magnesium ribbon be cleared before burning in air?
You have been provided with three test tubes. One of them contains distilled water and the other two contain an acidic solution and a basic solution, respectively. If you are given only red litmus paper, how will you identify the contents of each test tube?
What are the two properties of carbon which lead to the huge number of carbon compounds we see around us?
Choose the correct option.
A rectangular coil of copper wires is rotated in a magnetic field. The direction of the induced current changes once in each
(a) two revolutions (b) one revolution
(c) half revolution (d) one-fourth revolution
Name two safety measures commonly used in electric circuits and appliances.
What kind of mirror – concave, convex or plain – would be best suited for use in a solar cooker? Why?
A shiny brown coloured element ‘X’ on heating in air becomes black in colour. Name the element ‘X’ and the black coloured compound formed.
Balance the following chemical equations.
(a) HNO3 + Ca(OH)2 → Ca(NO3)2 + H2O
(b) NaOH + H2SO4 → Na2SO4 + H2O
(c) NaCl + AgNO3 → AgCl + NaNO3
(d) BaCl2 + H2SO4 → BaSO4 + HCl
What are alloys?
An element reacts with oxygen to give a compound with a high melting point. This compound is also soluble in water. The element is likely to be
(a) calcium
(b) carbon
(c) silicon
(d) iron.
What processes would you consider essential for maintaining life?
Why are decomposition reactions called the opposite of combination reactions? Write equations for these reactions.