Class 12 Chemistry - Chapter Biomolecules NCERT Solutions | The two strands in DNA are not identical
The two strands in DNA are not identical but are complementary. Explain.
DNA is a long polymer of deoxyribonucleotide. The chemical structure of nucleotides has three components. Nitrogenous bases, pentose sugar and a phosphate group. There are two types of Nitrogenous bases: purine and pyrimidines. Purines are Adenine (A) and Guanine (G) and Pyrimidine are Cytosine (C), Uracil (U) and Thymine (T). Out of these nitrogenous bases only 4 are present in DNA and RNA, In DNA Adenine is paired with Thymine by double hydrogen bond (A=T) whereas cytosine is coupled with Guanine by triple hydrogen bond (C=G, G=C). These nitrogenous bases are linked with pentose sugar through N-glycosidic linkage and form a structure called nucleoside.
Nucleoside when linked with (PO4) phosphate group through phosphodiester linkage. Combination of nucleotides with phosphate groups form the basic unit of nucleic acid called nucleotides. These nucleotides are linked together through phosphodiester bonds to form a long chain or backbone of DNA double helical structure. DNA was first identified by Friedrich Meischer in 1865 whereas its double helical structure was revealed by James watson and Francis crick. The base pairing confers a very unique property of the polynucleotide chain: each strand of DNA is complementary to each other. Therefore the sequence of bases in one strand is known then the sequence in other DNA can be determined with a template or mother strand that synthesizes the new daughter strand the process is known as DNA replication. This process requires a set of enzymes that catalyses the reaction. The double helical structure unwinds and forms a fork-like structure known as a replication fork. The DNA polymerase catalyses the polymerisahy only in one direction, that is 5’-3’. From two DNA strands which have polarity of 3’-5' act as mother or template stanels and new strand synthesis in opposite polarity of 5’-3’. Lets understand through this example:
As we know double hydrogen (Adenine) A=T (Thymine),
(Cytosine) C=G (Guanine) two DNA strand are said to be complementary to each other.
More Questions From Class 12 Chemistry - Chapter Biomolecules
- Q:-
What happens when D-glucose is treated with the following reagents? (i)HI (ii)Bromine water (iii)HNO3
- Q:-
How do you explain the absence of aldehyde group in the pentaacetate of D-glucose?
- Q:-
Glucose or sucrose are soluble in water but cyclohexane or benzene (simple six membered ring compounds) are insoluble in water. Explain.
- Q:-
The melting points and solubility in water of amino acids are generally higher than that of the corresponding halo acids. Explain.
- Q:-
Define the following as related to proteins
(i) Peptide linkage (ii) Primary structure (iii) Denaturation.
- Q:-
What products would be formed when a nucleotide from DNA containing thymine is hydrolysed?
- Q:-
Enumerate the reactions of D-glucose which cannot be explained by its open chain structure.
- Q:-
What are nucleic acids? Mention their two important functions.
- Q:-
Where does the water present in the egg go after boiling the egg?
- Q:-
How do you explain the amphoteric behaviour of amino acids?
Popular Questions of Class 12 Chemistry
- Q:-
For the reaction R → P, the concentration of a reactant changes from 0.03 M to 0.02 M in 25 minutes. Calculate the average rate of reaction using units of time both in minutes and seconds.
- Q:-
Write the formulas for the following coordination compounds:
(i) Tetraamminediaquacobalt (III) chloride
(ii) Potassium tetracyanonickelate(II)
(iii) Tris(ethane-1,2-diamine) chromium(III) chloride
(iv) Amminebromidochloridonitrito-N-platinate(II)
(v) Dichloridobis(ethane-1,2-diamine)platinum(IV) nitrate
(vi) Iron(III) hexacyanoferrate(II)
- Q:-
(i) Write structures of different isomeric amines corresponding to the molecular formula, C4H11N
(ii) Write IUPAC names of all the isomers.
(iii) What type of isomerism is exhibited by different pairs of amines?
- Q:-
Why are solids rigid?
- Q:-
Write any two characteristics of Chemisorption.
- Q:-
Write the structures of the following compounds.
(i) α-Methoxypropionaldehyde
(ii) 3-Hydroxybutanal
(iii) 2-Hydroxycyclopentane carbaldehyde
(iv) 4-Oxopentanal
(v) Di-sec-butyl ketone
(vi) 4-Fluoroacetophenone
- Q:-
Which of the ores mentioned in Table 6.1 can be concentrated by magnetic separation method?
- Q:-
Why are pentahalides more covalent than trihalides?
- Q:-
Silver atom has completely filled d orbitals (4d10) in its ground state. How can you say that it is a transition element?
- Q:-
Write structures of the following compounds:
(i) 2-Chloro-3-methylpentane
(ii) 1-Chloro-4-ethylcyclohexane
(iii) 4-tert. Butyl-3-iodoheptane
(iv) 1,4-Dibromobut-2-ene
(v) 1-Bromo-4-sec. butyl-2-methylbenzene
Recently Viewed Questions of Class 12 Chemistry
- Q:-
The experimental data for decomposition of N2O5
[2N2O5 → 4NO2 + O2]
in gas phase at 318K are given below:
t/s 0 400 800 1200 1600 2000 2400 2800 3200 102 × [N2O5] mol L-1 1.63 1.36 1.14 0.93 0.78 0.64 0.53 0.43 0.35 (i) Plot [N2O5] against t.
(ii) Find the half-life period for the reaction.
(iii) Draw a graph between log[N2O5] and t.
(iv) What is the rate law ?
(v) Calculate the rate constant.
(vi) Calculate the half-life period from k and compare it with (ii).
- Q:-
How the following conversions can be carried out?
(i) Propene to propan-1-ol
(ii) Ethanol to but-1-yne
(iii) 1-Bromopropane to 2-bromopropane
(iv) Toluene to benzyl alcohol
(v) Benzene to 4-bromonitrobenzene
(vi) Benzyl alcohol to 2-phenylethanoic acid
(vii) Ethanol to propanenitrile
(viii) Aniline to chlorobenzene
(ix) 2-Chlorobutane to 3, 4-dimethylhexane
(x) 2-Methyl-1-propene to 2-chloro-2-methylpropane
(xi) Ethyl chloride to propanoic acid
(xii) But-1-ene to n-butyliodide
(xiii) 2-Chloropropane to 1-propanol
(xiv) Isopropyl alcohol to iodoform
(xv) Chlorobenzene to p-nitrophenol
(xvi) 2-Bromopropane to 1-bromopropane
(xvii) Chloroethane to butane
(xviii) Benzene to diphenyl
(xix) tert-Butyl bromide to isobutyl bromide
(xx) Aniline to phenylisocyanide
- Q:-
Arrange the following metals in the order in which they displace each other from the solution of their salts.
Al, Cu, Fe, Mg and Zn
- Q:-
The molar conductivity of 0.025 mol L-1 methanoic acid is
46.1 S cm2 mol-1.
Calculate its degree of dissociation and dissociation constant. Given λ0(H+)
= 349.6 S cm2 mol-1 and λ0(HCOO-) = 54.6 S cm2 mol
- Q:-
Boiling point of water at 750 mm Hg is 99.63°C. How much sucrose is to be added to 500 g of water such that it boils at 100°C.Molal elevation constant for water is 0.52 K kg mol-1.
- Q:-
Give the uses of freon 12, DDT, carbon tetrachloride and iodoform.
- Q:-
What modification can you suggest in the Hardy-Schulze law?
- Q:-
What is an adsorption isotherm? Describe Freundlich adsorption isotherm.
- Q:-
The oxidation number of cobalt in K[Co(CO)4] is
(i) +1
(ii) +3
(iii) -1
(iv) -3
- Q:-
Aluminium crystallises in a cubic close-packed structure. Its metallic radius is 125 pm.
(i) What is the length of the side of the unit cell?
(ii) How many unit cells are there in 1.00 cm3of aluminium?
2 Comment(s) on this Question
Thanx for the help...
bullshit
- All Chapters Of Class 12 Chemistry
- All Subjects Of Class 12