State two ways to prevent the rusting of iron.
The rusting of iron can be prevented by:
(i) Painting or Oiling: By applying paint or oil on the surface becomes waterproof and the moisture and oxygen present in the air cannot come into contact with iron. Therefore, rusting can be prevented.
(ii) Galvanisation: An iron article is coated with a layer of zinc metal, which prevents the iron from coming in contact with oxygen and moisture. So, rusting is prevented.
Give an example of a metal which
(i) is a liquid at room temperature.
(ii) can be easily cut with a knife.
(iii) is the best conductor of heat.
(iv) is a poor conductor of heat.
Write equations for the reactions of
(i) iron with steam
(ii) calcium and potassium with water.
(i) Write the electron-dot structures for sodium, oxygen and magnesium.
(ii) Show the formation of Na2O and MgO by the transfer of electrons.
(iii) What are the ions present in these compounds?
Samples of four metals A, B, C and D were taken and added to the following solution one by one. The results obtained have been tabulated as follows.
Metal | Iron(II) sulphate | Cooper(II) sulphate | Zinc sulphate | Silver nitrate |
A | No reaction | Displacement | ||
B | Displacement | No reaction | Displacement | |
C | No reaction | No reaction | No reaction | No reaction |
You are given a hammer, a battery, a bulb, wires and a switch.
(a) How could you use them to distinguish between samples of metals and non-metals?
(b) Assess the usefulness of these tests in distinguishing between metals and non-metals.
Food cans are coated with tin and not with zinc because
(a) zinc is costlier than tin.
(b) zinc has a higher melting point than tin.
(c) zinc is more reactive than tin.
(d) zinc is less reactive than tin.
Why do ionic compounds have high melting points?
Metallic oxides of zinc, magnesium and copper were heated with the following metals.
Metal | Zinc | Magnesium | Copper |
---|---|---|---|
Zinc oxide | |||
Magnesium oxide | |||
Cooper oxide |
In which cases will you find displacement reactions taking place?
Why is sodium kept immersed in kerosene oil?
A man went door to door posing as a goldsmith. He promised to bring back the glitter of old and dull gold ornaments. An unsuspecting lady gave a set of gold bangles to him which he dipped in a particular solution. The bangles sparkled like new but their weight was reduced drastically. The lady was upset but after a futile argument the man beat a hasty retreat. Can you play the detective to find out the nature of the solution he had used?
Did Döbereiner’s triads also exist in the columns of Newlands’ Octaves? Compare and find out.
What is a good source of energy?
Why is diffusion insufficient to meet the oxygen requirements of multi-cellular organisms like humans?
What are trophic levels? Give an example of a food chain and state the different trophic levels in it.
What changes can you make in your habits to become more environment-friendly?
What is the difference between a reflex action and walking?
What is the importance of DNA copying in reproduction?
If a trait A exists in 10% of a population of an asexually reproducing species and a trait B exists in 60% of the same population, which trait is likely to have arisen earlier?
Why should a magnesium ribbon be cleared before burning in air?
Define the principal focus of a concave mirror.
Compare and contrast nervous and hormonal mechanisms for control and coordination in animals.
Name a mirror that can give an erect and enlarged image of an object.
Describe the structure and functioning of nephrons.
Find out, from Table 10.3, the medium having highest optical density. Also find the medium with lowest optical density.
Material medium |
Refractive index |
Material medium |
Refractive index |
Air | 1.0003 | Canada Balsam |
1.53 |
Ice | 1.31 | ||
Water | 1.33 | Rock salt | 1.54 |
Alcohol | 1.36 | ||
Kerosene | 1.44 | Carbon disulphide |
1.63 |
Fused quartz |
1.46 | ||
Turpentine oil |
1.47 | Ruby | 1.71 |
Benzene | 1.50 | Sapphire | 1.77 |
Crown glass |
1.52 | Diamond | 2.42 |
Table 10.3 Absolute refractive index of some material media
Can any source of energy be pollution-free? Why or why not?
What are trophic levels? Give an example of a food chain and state the different trophic levels in it.
What is the role of the acid in our stomach?
What are the components of the transport system in human beings? What are the functions of these components?
How do auxins promote the growth of a tendril around a support?
Give an example of a double displacement reaction other than the one given in activity 1.10.